Diameter range : | 100-1800mm |
Thickness range: | galvanized sheet:0.5-1.2mm |
stainless steel:0.4-0.8mm | |
Material width: | 137mm |
Decoiler: | vertical ,max load 1200kg |
Adding tendons: | one or more(optional) |
Seam lock : | located either inside or outside duct |
Production speed: | 0-30m/min,adjustable |
Cutter: | Roller shear |
Drive System |
Cutting and turning over ducts adopt air-power; Compaction of feed rolls adopts hydraulic power |
Forming head dies: | steel(aluminium alloy is optional) |
Total weight: | 2000kg |
Outside size: | Main machine:3.4x2x1.8 mm |
Discharge table:2x1.2x1.1m | |
Total power : | 16KW,  main motor:15kw, Hydraulic motor:0.75kw, Seam locking wheel motor:0.12kw |
Electrical source: | 380v/50hz/3ph |
Console: | Push buttons panel |
Cut-to-length: | Automatic measure system |
Roller shear-spiral duct machine